Turai da UK LED Direban Gaggawa 18491X
Takaitaccen Bayani:
18491X Linear LED Direban Gaggawa An tsara shi musamman don kasuwar Turai da Burtaniya.184910 shine na 4.5W 90 minutes da 2.2W 3 hours madadin kuma 184911 shine na 9W 90 mintuna da 4.5W 3 hours madadin.Mafi ƙanƙanta girman madaidaicin madaidaicin jagorar ana iya hawa a cikin kowane nau'in ƙwanƙwasa madaidaiciyar madaidaiciyar madaidaiciyar haske na LED ko kunkuntar sarari da ƙaramin sarari.Daidai jituwa tare da duka DC LED lodi da Turai AC LED tubes, kwararan fitila da luminaires.Don shigar a cikin kayan aikin hasken wuta, misali hasken layi na LED, hasken panel LED, hasken haske na LED, hasken ƙasa, LED UFO / Highbay da sauransu.
| Nau'in | 184910 | 184911 |
| Ƙarfin wutar lantarki | 220-240VAC 50/60Hz | |
| Ƙididdigar halin yanzu | 0.01A | 0.02A |
| Ƙarfin ƙima | 3W | 4W |
| Fitowar gaggawa | Default: 4.5W 90 min | Na asali:9W 90 min |
| Na zaɓi: 2.2W 180 min | Na zaɓi:4.5W 180 min | |
| Fitar wutar lantarki | 5-200VDC | 10-300VDC |
| Fitar halin yanzu na direban AC | 3A (max.) | |
| Mitar aiki | 320kHz ≥f≥50kHz | |
| Ƙarfifɗan wasan kwaikwayo | 0.5 | |
| Baturi | Li-ion | |
| Lokacin caji | Awanni 24 | |
| Min.Lokacin fitarwa | Koma zuwa fitowar gaggawa | |
| Lokacin rayuwa | 5 Ykunnuwa | |
| Cajin halin yanzu | 0.17 A | |
| Cajin hawan keke | > 1000 | |
| Yanayin aiki | 0-50℃(32°F-122°F) | |
| inganci | 80% | |
| Kariya mara kyau | Sama da kaya, fiye da zafin jiki, buɗewar kewayawa, kariyar gajeriyar kewayawa tare da sake saiti ta atomatik | |
| Waya | 0.75-1.5 mm2 | |
| EMC& FCC IC misali | EN 55015, EN 61547, EN 61000-3-2, EN 61000-3-3; | |
| Matsayin aminci | TS EN 61347-1; EN 61347-2-7 | |
| Meas18491Xmm [inch] | 184910:L200 [7.87] x W30 [1.18] x H22 [0.87] Hauwacshafi: 190 [7.48] 184911: L260 [10.24]x W30 [1.18] x H22 [0.87] Mai hawacshafi: 250 [9.84] | |
18491X MODULE
| Abu Na'a. | L1 mm [inch] | M mm [inch] | W mm [inch] | H mm [inch] |
| 184910 | 200 [7.87] | 190 [7.48] | 30 [1.18] | 22 [0.87] |
| 184911 | 260 [10.24] | 250 [9.84] | 30 [1.18] | 22 [0.87] |
CUTAR GWAJI NA LED
Naúrar girma: mm [inch]
Haƙuri: ± 1 [0.04]
Domin DC LED Load (KIYAYE)
Domin DC LED Load (NOKIYAYE)
DOMIN AC LED TUBE/BULB/LUMINAIRE
AIKI
Lokacin da aka yi amfani da wutar lantarki, LED ɗin gwajin gwajin yana haskakawa, yana nuna cewa ana cajin batura.
Lokacin da wutar AC ta gaza, 18491X tana canzawa ta atomatik zuwa wutar gaggawa, tana aiki da nauyin walƙiya a ƙimar ƙarfin gaggawa.Lokacin gazawar wutar lantarki, maɓallin gwajin LED ɗin zai kashe.Lokacin da aka dawo da wutar AC, gaggawar 18491X tana sauya tsarin zuwa yanayin aiki na yau da kullun kuma ya dawo da cajin baturi.Matsakaicin lokacin aikin gaggawa shine mintuna 90.Lokacin caji don cikakken fitarwa shine awa 24.Ana iya yin gwajin fitarwa na ɗan gajeren lokaci bayan18490Xyana caji na awa 1.Yi cajin sa'o'i 24 kafin yin gwajin fitarwa na dogon lokaci.
CIGABA DA FITAR DA GAGAWA
Lokacin gaggawa na saitunan masana'anta shine min.Minti 90.A cikin yanayin al'ada, LTS yana ƙyalli
sannu a hankali - 1 daƙiƙa a kunne da 1 seconds a kashe, yayin da ake cajin baturi;bayan an cika cajin baturi,
LTS yana da tsawo ON.Ana iya ƙara lokacin gaggawa zuwa min.Minti 180 da ikon gaggawa
rage da rabi ta hanyar aiki da LTS kamar haka: Latsa ka riƙe LTS na min.5 seconds, sake shi, kuma
a cikin daƙiƙa 1 don danna ka riƙe LTS na min.5 seconds kuma.A cikin wannan zaɓi, LTS koyaushe yana lumshe ido
sannu a hankali a yanayin al'ada: 5 seconds ON, 0.5 seconds KASHE, komai idan baturi ya cika ko a'a.
GWAJI DA KIYAWA
Ana ba da shawarar gwaji na lokaci-lokaci don tabbatar da tsarin yana aiki daidai.
1. Ka gani duba LED gwajin canji (LTS) kowane wata.Ya kamata a haskaka lokacin da ake amfani da wutar AC.
2. Gudanar da a6Gwajin fitarwa na 0-na biyu ta hanyar kashe mai kashe gaggawa kowane wata.LTS zai kasance a kashe.
3. Gudanar da gwajin fitarwa na mintuna 90 sau ɗaya a shekara.LTS za a kashe yayin gwaji.
GWAJI NA AUTO
18491X yana da fasalin Gwajin atomatik wanda ke adana farashi ta rage buƙatar gwajin hannu.
1. Gwajin Mota na Farko
Lokacin da aka haɗa tsarin da kyau kuma an kunna shi, 18491X zai yi gwajin atomatik na farko.
Idan wani yanayi mara kyau ya kasance, LTS zai lumshe ido da sauri.Da zarar an gyara yanayin rashin daidaituwa.
LTS zai yi aiki daidai.
2. Gwajin atomatik da aka riga aka tsara
a) Ƙungiyar za ta gudanar da gwajin atomatik na farko na wata-wata bayan awanni 24 kuma har zuwa kwanaki 7 bayan kunnawar farko.
Sannan za a yi gwaje-gwaje na wata-wata kowane kwana 30.
b) Gwajin atomatik na shekara-shekara zai faru kowane mako 52 bayan kunnawar farko.
- Gwajin atomatik na wata-wata
Za a yi gwajin Motoci na wata-wata kowane kwana 30, kuma za a gwada;
Al'ada zuwa aikin canja wuri na gaggawa, gaggawa, caji da yanayin fitarwa na al'ada ne.
Lokacin gwaji na wata-wata kusan 30 ~ 60 seconds ne.
- Gwajin atomatik na shekara-shekara
Gwajin atomatik na shekara-shekara zai faru kowane mako 52 bayan farkon awanni 24 cikakke, kuma zai gwada;
Ingantacciyar ƙarfin ƙarfin baturi na farko, aikin gaggawa na mintuna 90 da ƙarfin ƙarfin baturi mai karɓa a ƙarshe
na cikakken gwajin mintuna 90.
Idan gazawar wutar lantarki ta katse gwajin atomatik, cikakken gwajin atomatik na mintuna 90 zai sake faruwa bayan awanni 24.
ikon ya dawo.Idan gazawar wutar lantarki ya sa baturin ya fita gabaɗaya, samfurin zai sake farawa
Gwajin Mota na Farko da Gwajin Aikata da aka Shirya.
GWAJIN HANNU
- Danna LTS sau ɗaya don kwaikwayi yanayin gaggawa.
- Danna LTS sau 2 ci gaba da ciki3seconds don tilasta gwajin kowane wata.Bayan kammala gwajin, gwajin na gaba (kwana 30) na wata-wata zai ƙidaya daga wannan ranar.
- Danna LTS sau 3 ci gaba da ciki3seconds don tilasta gwajin shekara-shekara.Bayan an kammala gwajin.
gwajin shekara na gaba (makwanni 52) zai ƙidaya daga wannan ranar.
- Yayin kowane gwajin hannu, danna ka riƙe LTS sama da daƙiƙa 3 don ƙare gwajin da hannu.
Lokacin Gwajin atomatik wanda aka riga aka tsara ba zai canza ba.
SHARUDAN CANCANTAR GWAJIN LED
LTS Slow Blinking: Cajin Al'ada
LTS A Kunna: Baturi Cikakkiyar Cajin - Yanayin Al'ada
Kashe LTS: Rashin Wutar Lantarki
Canjin A hankali LTS: A Yanayin Gwaji
LTS Da sauri Kiftawa: Halin da ba na al'ada ba - Ana buƙatar Aiki Gyara
1. Don hana girgiza wutar lantarki, kashe wutar lantarki ta hanyar sadarwa har sai an gama shigarwa kuma an ba da wutar AC ga wannan samfur.
2. Wannan samfurin yana buƙatar samar da wutar lantarki na AC wanda ba a kunna ba na 220-240V, 50/60Hz.
3. Tabbatar cewa duk haɗin kai sun dace da ƙa'idodin Turai da kowace ƙa'idodin gida.
4. Don rage haɗarin girgiza wutar lantarki, cire haɗin na yau da kullun da kayan wuta na gaggawa da mai haɗa wannan samfur kafin yin hidima.
5. Yana iya samar da mafi ƙarancin haske na mintuna 90 a ƙarƙashin yanayin gaggawa.
6. 18490X-X sune UL An jera su don shigarwa na filin, kuma ana amfani da su tare da ƙasa, UL Listed, wuraren damp da aka ƙaddara.
7. Wannan samfurin ya dace don amfani a bushe ko damp wurare.Kar a sanya shi kusa da iskar gas, dumama, kantunan iska ko wasu wurare masu haɗari.
8. Yi amfani da wannan samfurin a cikin mafi ƙarancin 0°C, 50°C iyakar yanayin zafi (Ta).
9. Kar a yi ƙoƙarin yin hidimar batura.Ana amfani da baturi mai rufewa, wanda ba zai iya maye gurbin filin ba.Tuntuɓi masana'anta don bayani ko sabis.
10. Kamar yadda wannan samfurin ya ƙunshi batura, don Allah a tabbatar da adana shi a cikin gida na -20 ° C ~ 30 ° C.Dole ne a yi caji sosai kuma a fitar da shi duk bayan watanni 6 daga ranar da aka saya har sai an yi amfani da shi a hukumance, sannan a sake cajin 30-50% a adana shi har tsawon watanni 6, da sauransu.Idan ba a yi amfani da baturin fiye da watanni 6 ba, zai iya haifar da zubar da kai da yawa na baturin, kuma sakamakon raguwar ƙarfin baturi ba zai iya dawowa ba.Don samfurori tare da keɓantaccen baturi da tsarin gaggawa, da fatan za a cire haɗin haɗin baturi da tsarin don ajiya.Saboda kaddarorin sinadarai, yanayi ne na yau da kullun don ƙarfin baturi ya ragu a zahiri yayin amfani.Masu amfani yakamata suyi la'akari da wannan lokacin zabar samfuran.
11. Yin amfani da na'urorin haɗi wanda masana'anta ba su ba da shawarar ba na iya haifar da rashin tsaro da garanti mara kyau.
12. Kada kayi amfani da wannan samfurin don wanin abin da aka nufa.
13. ƙwararrun ma'aikatan sabis su yi shigarwa da sabis.
14. Ya kamata a ɗora wannan samfurin a wurare da kuma tsayin daka inda ba za a yi masa lahani ga ma'aikata mara izini ba.
15. Tabbatar da dacewa samfurin kafin shigarwa na ƙarshe.Wiring ya kamata ya kasance daidai da zane na wayoyi, kurakurai na wayoyi zasu lalata samfur.Halin hatsarin aminci ko gazawar samfur ta hanyar haramtacciyar aikin masu amfani baya cikin iyakar karɓar korafin abokin ciniki, diyya ko tabbacin ingancin samfur.